Forney E71T-GS 0.035 in. Mild Steel Flux Cored Wire 79000 psi 2 lb

Item No. 2102689 2102689


This E71T Flux-Core MIG (GMAW) welding wire for mild steel is ideal for all-position welding and best suited for single pass applications with high travel speed. Pink color coding on label. No shielding gas required.
  • This all-position flux-core MIG wire is self-shielded, making it ideal for work on rusty, dirty and painted material
  • This wire produces moderate to low spatter
  • Using an argon/CO2 mix will reduce spatter
  • Forney's E71T wire runs hotter than solid wires
  • This makes it best suited for single pass applications with high travel speed
  • Because this wire does not require shielding gas, it is ideal for outdoor welding
  • Wires that do require gas run the risk of wind blowing the gas away, ultimately resulting in porosity
  • Forney
  • 3
  • 42302
  • 2102689
  • Flux Cored Wire
  • N
  • 5.2
  • 0.035 inch
  • Mild Steel
  • Boxed
  • 79000 pound per square inch
  • For Wire Welding
  • 2 pound
  • E71T-GS
  • DCEN
  • Mild Steel

You May Also Like