EnviroTex Lite High-Gloss Clear Finish 1 gal

Item No. 13147 13147


EnviroTex Lite is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70 deg. F and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use.
  • The original 1:1 epoxy coating system since 1969
  • Convenient 1:1 mix ratio by volume
  • 20-30 minute working time
  • FDA complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed and fully cured
  • Self-levels to approximately 1/16 inch
  • 1:1 ratio is easy to use
  • Low odor
  • Produces a durable high-gloss surface coating for artwork, table tops, crafts and more
  • Waterproof
  • Heat and alcohol resistant
  • Envirotex Lite
  • 19
  • 2128
  • 13147
  • N
  • Finish
  • Clear
  • Clear
  • 1 gallon (US)
  • 32 square foot
  • High Gloss
  • 8 hour
  • No
  • Interior
  • 72 hour
  • Clear

You May Also Like