Guide Bar 16" Rollomatic 3/8"

For use with chainsaws and pole pruners using the ¼” STIHL PICCO™ saw chain and with power up to 1.0 kW, the STIHL ROLLOMATIC^® E Mini guide bar is great for pruning, firewood cutting and storm cleanup. The small radius bar nose with reduced diameter sprocket provides enhanced maneuverability while pruning among branches and lessens risk of kickback. Available in 10” (3005 008 3403) and 12” (3005 008 3405) 3005 mount. Accepts drive links of .043 gauge (1.1 mm).

Ask your local dealer for assistance selecting the right guide bar for your chainsaw.

Note: The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead it is installed.

WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.

WARNING! The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus (Q) additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains.

STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.

* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.